ONE CONDUCTOR

Model 110

One Conductor, 10Amp

Mounts at the end of a rotating axis.
Mount by the press fit receptacle accessory.
Wire attaches using the accessory receptacle or cap.
This model is designed to mount at the bottom of a vertical rotating shaft.

Model No.	Terminals	Voltage AC/DC	Max Amp Rating	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation
110	1	N/A	10	200	<1mΩ	3600	140 (60) /-20(-29)	35	N/A
110-SS	1	N/A	10	200	<1mΩ	3600	140 (60) /-20(-29)	35	N/A
110-L	1	N/A	10	200	<1mΩ	1200	140 (60) /-20(-29)	10	N/A

“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
“L” designator indicates low torque
Note: The anodized aluminum housing of the 110 series Mercotac is electrically “hot” to the internal conductor.

Model 110-T & 105

One Conductor, 10Amp/4Amp

Mounts at the end of a rotating axis.
Mount by the press fit receptacle accessory.
Wires attach using the accessory receptacle and cap.
Mercotac models 110-T & 105 are ideal for shaft grounding applications, including HVAC and VFD motor shaft grounding, thus avoiding very costly bearing damage.

Model No.	Terminals	Voltage AC/DC	Max Amp Rating	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation
110-T	1	N/A	10	200	<1mΩ	3600	140 (60) /-20(-29)	35	N/A
110-TS	1	N/A	10	200	<1mΩ	3600	140 (60) /-20(-29)	35	N/A
110-TL	1	N/A	10	200	<1mΩ	1200	140 (60) /-20(-29)	10	N/A
105*	1	N/A	4	200	<1mΩ	7500	212 (100) / 45(7)	<10	N/A
105-SS*	1	N/A	4	200	<1mΩ	7500	212 (100) / 45(7)	<10	N/A

“T” designator indicates standard model
“TS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
“TL” designator indicates low torque
“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
* indicates high temp. high RPM
Note: The anodized aluminum housing of the 110 & 105series Mercotac is electrically “hot” to the internal conductor.

Model 1250

One Conductor, 250Amp

4 nuts included
Boot Kit available
Available in metric thread (1250-M / 1250-MS / 1250-MSX)
Available with stainless steel ball bearing (1250-SS / 1250-MS) (recommended for wet or corrosive environments)
Available with stainless steel body and bearing (1250-SX / 1250-MSX) (recommended for wet or corrosive environments)
Mercotac model 1250 series are ideal connectors for high-power applications such as on plating electrodes and welding cable reels.

Model No.	Terminals	Voltage AC/DC	Max Amp Rating	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation
1250	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A
1250-SS	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A
1250-M	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A
1250-MS	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A
1250-SX	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A
1250-MSX	1	N/A	250	200	<1mΩ	1200	140 (60) /-20(-29)	250	N/A

“SS” designator indicates stainless steel ball bearing
“M” designator indicates metric thread (M10 x 1.5)
“MS” designator indicates metric thread & stainless steel ball bearing
“SX” designator indicates stainless steel body & bearing
“MSX” designator indicates metric thread & stainless steel body & bearing
Note: The housing of the 1250 series Mercotac connector (anodized aluminum or stainless steel) is electrically “hot” to the internal conductor.

Model 1500

One Conductor, 500Amp

2 hex nuts included as shown
Available with external dust seal (Model 1500-1)
Available with stainless steel ball bearing (Model 1500-SS)

Model No.	Terminals	Voltage AC/DC	Max Amp Rating	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation
1500	1	N/A	500	200	<1mΩ	300	140 (60) /-20(-29)	750	N/A
1500-SS	1	N/A	500	200	<1mΩ	300	140 (60) /-20(-29)	750	N/A
1500-1	1	N/A	500	200	<1mΩ	300	140 (60) /-20(-29)	750	N/A
1500-1-SS	1	N/A	500	200	<1mΩ	300	140 (60) /-20(-29)	750	N/A

“-1” designator indicates an external dust seal
“-SS” designator indicates stainless steel ball bearing
Safety Note: The stainless steel housing of the 1500 series Mercotac connector at higher voltages is electrically “hot” to the internal conductor.

Tel: +44 1642 725109 Email: sales@matoll.eu

Germany

Tel : +49 6195 80 60 118 Email: info@matoll.eu

Web: www.matoll.eu